FAQ Electrical kits
Find here general questions about our electrical kits
It is important to measure your enclosure to check compatibility and refer to the table below, if in doubt write us a message and we will be happy to answer you.
Pedal width | Accessory required: |
68 to 73mm | Without additional accessories |
86 to 92mm | Lekkie BBS adapter |
PF30 68mm (46mm inner diameter) | Lekkie adapter PF-30 |
The autonomy is very difficult to measure, because it depends on many different parameters, such as the motor power, the weight of the bike, the rider, and the luggage.
The differences in altitude also play an important role.
According to our tests we have found that with the 500w kit and an average towed weight of 110kg (bike, rider, luggage included) we can do about 50 to 60 km on a route including 1000m of positive and negative altitude difference
In Switzerland the legislation allows you to ride a converted bike without registration (yellow moped plate) up to 500w of engine power, and 25km/h of assistance (this does not concern the limit at which you can ride, you must respect the road traffic law in all cases)
If you exceed the assistance limit of 25km/h or 500w of engine power you can only use your bike on private property.
If you wish to ride on public roads with a motor of more than 500w or 25km/h, you must have your bike inspected by the motor vehicle department of your canton of residence. Before making such a purchase, please contact the motor vehicle department of your canton of residence for information.
Here you will find a list of the permitted regulations for electric bicycles.
French: Download the memento
German: Download memento
All our kits are guaranteed for 24 months from the date of purchase, including manufacturing defects.
Standard wear and tear, assembly errors and poor maintenance are excluded from the guarantee.
The subsidies are provided by your commune of residence.
Each commune has its own criteria, it is advisable to inquire with it to obtain such subsidies.
For information the communes which subsidize the soft mobility by the purchase of a bicycle, in principle it subsidizes the purchase of a kit provided that it is bought and paid in Switzerland
All kits are in stock and available immediately either from our stock in Prilly or from our supplier who can deliver within a timeframe as noted on each kit variant.
The assembly of the kit does not require a great deal of knowledge in assembly, however you can contact us to make you an offer of assembly at our workshop in Prilly or at one of our partners depending on your place of residence.
- The motor does not require any special maintenance, there is no need to open it for maintenance if you are not expressly asked to do so by our technical service. Any opening of the motor without our consent will result in the loss of the warranty immediately
- The battery must be charged regularly, especially when the bike is not used for a prolonged period of time (e.g. in winter) .
If the battery is left without charge for a long period of time, the battery may be ruined, the warranty will also be lost if after inspection it is found that it is due to a slow and prolonged discharge.
Here are the elements that can help you to target the fault:
1. Is my battery charged?
2. Are all the connectors properly plugged in?
If they do not light up, please contact us and we will help you as soon as possible
Yes you can go to our shop in Prilly, however if the shop did not take care of the assembly of your kit, and the repair requires disassembly the costs are at the customer's expense. If we assembled your kit, we take care of everything as part of the service you paid for when you entrusted your bike to us.